전체카테고리

홈>서비스>자료

자료

원자재

20190723095087188718              

With the features of high level purity, precise chemical composition control, high reduction ratio, high dimensional accuracy and excellent surface quality, the products are mainly used to manufacture the axle shaft, gas cylinder and plastic mould, etc.

자재

탄소 강철봉,냉간 압연 강철봉,열간압연 강철봉,아연 도금 강철봉,합금 강철봉

유형

라운드 바,육각 바,정사각형 바,압연 플랫 바,전단 및 가장자리 바

크기

6mm-50mm

20190723095483978397               후판

Heavy plates are mainly used in shipbuilding, offshore platform, boiler, pressure vessel, pipeline, high building, bridge and heavy duty truck.

자재

EN 10025-2, ASTM A36/A36M, ASTM A283/A283M, ASTM A573/A573M, JIS G 3101

유형

연질 저탄소강,고장력강,내마모강,철갑판

두께

6~40mm 전단 절단 / 40.01~160mm 화염 절단

20190723095714711471               HR Steel Sheet

With the excellent properties such as high strength, good toughness, easy machinability and good weldability, Baosteel"s hot-rolled steel products are widely used in ship, automobile, bridge, building, machinery and pressure vessel and other industrial applications.

자재

S315MC – S560MC, S235 – S355, S235 – S355

크기

두께: 1.5-4.0mm, 너비: 200-1750mm, 길이: 100-6000mm

20190723095931533153               CR Steel Sheet

CR steel sheets have good processability, with good flatness and excellent surface, are available with different thickness and width combinations; are mainly used to manufacture the high value-added products in automotive and appliance, beverage packaging, electronic, electrcial moor and building etc. 

기본

EN10130, EN10268

크기

Thickness:0.4-3.0mm, Width: 20-1700mm,     Length: 100-6000mm

20190723100150655065               탄소강

Carbon steel is steel where the main interstitial alloying constituent is carbon in the range of 0.12-2.0%. Suitable for nominal pressure PN ≤ 32.0MPa, temperature -30-425 ℃ water, steam, air, hydrogen, ammonia, nitrogen and petroleum products, and other media.

유형

High-carbon steel, Low-carbon steel, Structure steel

마감재

열연강판(HR), 냉연강판(CR), 2B, 2D, BA NO(8), SATIN(Met with Plastic Coated)

형태

코일, 호일, 롤, 일반 시트, 심 시트, 천공 시트, 체크 무늬 판, 스트립, 플랫, 블랭크(원), 링(플랜지) 등.

2019072310030597597               합금강

Alloy steel is often subdivided into two groups: high alloy steels and low alloy steels. The difference between the two is defined somewhat arbitrarily. However, most agree that any steel that is alloyed with more than eight percent of its weight being other elements beside iron and carbon, is high alloy steel. 

유형

고장력강, 표면 경화강 및 질화 특성을 위해 특별히 개발된 강.

자재

9CR-L80,13CR-L80,4130,4130M,4140,4145,4145M,4340,4330  V-MOD,8630MOD,C90,C110,L80,P110,Q125,T95

20190723100343664366               스테인리스 강

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. It is also called corrosion-resistant steel or CRES when the alloy type and grade are not detailed, particularly in the aviation industry.

유형

스테인레스 스틸 바, 스테인레스 스틸 플레이트 및 시트, 스테인레스 스틸 코일/스트립

자재

SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 등

20190723100433363336               블랙 스틸

Black steel is a term given to steel pipe with a black oxide scale on the surface. This black oxide scale is formed when the pipe is forged and is typically sealed with a protective oil to prevent corrosion. Because of this oxide scale and protective film, black steel pipe requires little maintenance and is used for a wide variety of applications, including in water, steam, air and gas services. 

유형

ERW black steel pipe

자재

ASTM A-53 Grade A

크기

1/2 "-2"